PPWR packaging declaration of conformity: a plain guide for Shopify sellers
Information tool, not legal advice. Last checked against the official texts on 16 November 2026.
The EU Packaging and Packaging Waste Regulation (PPWR) is Regulation (EU) 2025/40. It has applied since 12 August 2026 (Art. 71). One of its new duties is paperwork: the manufacturer of packaging must assess it, keep technical documentation and draw up an EU declaration of conformity. This guide explains who that manufacturer is, what the declaration contains and what you can ask your suppliers for.
Are you the "manufacturer" of your packaging?
PPWR defines "manufacturer" broadly (Art. 3(1)(13)):
- the person that manufactures packaging or a packaged product; however
- where a business has packaging or a packaged product designed or manufactured under its own name or trademark, that business is the manufacturer, even if another trademark is visible.
So if you sell products in packaging made for your brand, you may be the manufacturer under PPWR, even if a supplier makes the box.
Special rule for micro-enterprises. If you are a micro-enterprise and your packaging supplier meets certain location conditions, the supplier is treated as the manufacturer. The regulation words this condition in two places: Article 3(1)(13)(b) says the supplier is located "in the same Member State", and Article 15(12) says "in the Union". Ask a lawyer how this applies to you before relying on it.
What the manufacturer must do
Before placing packaging on the market, the manufacturer (Art. 15(2)–(3)):
- carries out the conformity assessment procedure in Art. 38, which is Module A, internal production control (Annex VII);
- draws up technical documentation;
- draws up the EU declaration of conformity once compliance has been demonstrated (Art. 39);
- keeps both for 5 years after single-use packaging, or 10 years after reusable packaging, was placed on the market (Art. 15(3));
- provides them to a national authority on reasoned request, within 10 days (Art. 15(10)).
The manufacturer also marks the packaging with an identifier (type, batch or serial number) and its name and postal address, on the packaging or through a QR code or other data carrier (Art. 15(5)–(6)).
What the declaration contains
The declaration states that fulfilment of the requirements of Articles 5 to 12 has been demonstrated, follows the model in Annex VIII, is kept up to date, and is written in or translated into the language(s) required by each Member State where the packaging is sold (Art. 39(1)–(2)). By drawing it up, the manufacturer takes responsibility for the packaging's compliance (Art. 39(4)).
The Annex VIII model asks for:
- a unique identification number of the packaging;
- name and address of the manufacturer and, where applicable, its authorised representative;
- a statement that the declaration is issued under the sole responsibility of the manufacturer;
- the object of the declaration (packaging identification and description);
- a statement of conformity with the relevant EU legislation;
- references to harmonised standards, common specifications or other technical specifications used;
- where applicable, notified body details;
- additional information, plus place, date, name, function and signature.
What the technical documentation covers
Under Module A (Annex VII) it includes, where applicable: a general description and intended use of the packaging; design drawings and materials of components; the standards or specifications applied; a description of how the assessments under Articles 6, 10 and 11 were carried out; and test reports.
Ask your suppliers
PPWR obliges suppliers of packaging and packaging materials to give the manufacturer "all the information and documentation necessary" to demonstrate conformity, including the technical documentation in Annex VII, in a language the manufacturer understands (Art. 16). A practical request list:
- material composition of each packaging item (box, mailer, filler, tape);
- supplier's own declaration or test reports for the materials;
- documents for packaging that touches food, cosmetics or other contact-sensitive products, where relevant;
- identification (type or batch number) you can reference in your declaration.
Not everything starts at once
The regulation applies from 12 August 2026, but several requirements in Articles 5 to 12 carry their own later dates. For example, the harmonised sorting label applies from 12 August 2028 or 24 months after the implementing acts, whichever is later (Art. 12(1)). Check the date in each article that applies to your packaging.
How EuBinder helps
EuBinder is a Shopify app. It keeps supplier packaging evidence in one place and drafts packaging declarations from the data you enter, following the Annex VIII structure. You review, complete and sign the declaration; the app does not assess your packaging.
Install EuBinder from the Shopify App Store
Sources (official text, read 16 November 2026)
- Regulation (EU) 2025/40 (PPWR), OJ L, 22.1.2025: Art. 3(1)(13), 12(1), 15, 16, 38, 39, 71; Annexes VII and VIII — https://eur-lex.europa.eu/eli/reg/2025/40/oj/eng
Information tool, not legal advice. PPWR may be amended and Commission guidance may change how it is read; ask a lawyer for your packaging.